East Anglian Air Ambulance HQ

Project Overview

This year during Air Ambulance Week, on Friday 10th September they held a special event to mark the opening of the newly extended and renovated operational base and headquarters at Norwich Airport, named Helimed House. The new base also offers a full training suite for the clinical teams.

As the build-up requirements at the East Anglian Air Ambulance HQ called for a robust floor construction there was no scope to install a normal wet UFH system clipped to an insulation layer. The project specification called for relatively low flow and return temperatures of 45/35ºC, this is to future-proof the building for use with heat pumps.

We adjusted our pipe fixings, using cable ties to secure the underfloor heating pipework to a layer of concrete reinforcement mesh. We designed the UFH system to overcome heating shortfalls based on the reduced flow and return temperatures.

Working on behalf of our client F G Fennell & Co Ltd who were entrusted mechanical and electrical contractors on this project, it was a pleasure to design, supply and install the Underfloor Heating package.

We offer floor build-up, heat loss calculation, technical drawings, manifold & control placement, project valuation, experienced install team, handover & commissioning and everything in between. We’re here to advise, guide and deliver your project.  You can be confident in our service, products, warranties and insurances.


Project Size



Wet underfloor heating system attached to reinforced mesh, due to the sub-base being a monolithic floor slab.

Date of Installation & Commissioning

July 2020 – March 2021


“Our operations team installed the system on time, keeping to the schedule of works ensuring our clients project progressed as planned”

Get In Touch


Request a Quote

More commercial projects

From schools and offices to showrooms and warehouses…

We’re here to help…

Complete this form and one of our friendly sales team will respond to your request within 1 working day.

Contact Us

This field is for validation purposes and should be left unchanged.